Ricoh V-C3 D081 Field Service Manual page 530

6. Troubleshooting
Download Error Codes
No. Display
01 Reboot after card insert
E01
Module ID
Card No. xx/xx
02 Download Error E02
Power off/on
03 Download Error E03
6
Power off/on
04 Download Error E04
Power off/on
05 Download Error E05
Power off/on
528
Error Description/Recovery
Controller ROM update error 1
When the update break data was stored in NVRAM, the break module
information and the decompression module capable of writing did not
match.
Recovery
• Use the correct card
Controller ROM update error 2.
Error occurred during ROM update program initialization.
Recovery
• Cycle the machine off/on to rewrite
Controller ROM update error 3
The ROM for the write operation does not exist.
Recovery
• Cycle the machine off/on
• Install the missing ROM DIMM
Controller ROM update error 4
GZIP data confirmation failed. (CRC value check)
Recovery
• Cycle the machine off/on
• Set DIP SW 1 to ON and retry
• Replace RAM DIMM
• Replace controller board
Controller ROM update error 5
Error occurred when writing to the device.
Recovery
• Cycle the machine off/on
• Set DIP SW 1 to ON and retry
• Replace RAM DIMM
• Replace controller board