Ricoh V-C3 D081 Field Service Manual page 913

249 Fusing/Exit Motor: Half Speed 1
5810 Cancel Fusing SC
When the machine issues one of the "Level A" SC codes shown below, this indicates a serious
problem in the fusing unit. The machine is disabled and the operator cannot reset the SC. The
machine requires servicing immediately. Touch [EXECUTE] release the machine for servicing.
• SC542 – SC545 Heating roller thermistor 1
• SC547 – Zero Cross
• SC548 – SC550 Heating roller thermistor 2
• SC551 – Pressure roller thermistor
• SC553 – SC555 Pressure roller thermistor
• SC662 – SC565 Hot roller thermistor
5811 Machine Serial
This SP displays the machine serial number.
5812 Service Tel. No. Setting
1 Service
Inputs the telephone number of the CE (displayed when a service call condition occurs.)
2 Facsimile
Use this to input the fax number of the CE printed on the Counter Report (UP mode). Not Used
3 Supply
Displayed on the initial SP screen.
4 Operation
Allows the service center contact telephone number to be displayed on the initial screen.
5816 Remote Service
1 I/F Setting
Group 5000
4
335