Ricoh V-C3 D081 Field Service Manual page 814

4. Appendix: Service Program Mode Tables
Temperature/Humidity Sensor: PCU. This SP displays the temperature (°C) and humidity (both
relative and absolute) readings of the temperature and humidity sensor located above the M
PCU on the right side of the machine. These readings are updated every 60 sec.
• 001 to 004 display the current readings.
• 005 to 008 display the previous readings.
1 Humid:Recent
2 Rel Humid:Recent
3 Abs Humid:Recent
4 Environ:Recent
4
5 Humid:JobEnd
6 Rel Humid:JobEnd
7 Abd Humid:JobEnd
8 Environ:JobEnd
290
Env Set:PCU
2
Use these settings to turn off the temperature/humidity sensor, and raise or lower the level of
detection.
[0 to 6/1
0: Sensor Detect
1: LLL
2: LL
3: ML
2903 Env Thresh: PCU
This SP sets the threshold value of LL and ML for the current room temperature.
236
[0 to 100/ 1 deg (or %rH)
4: MM
5: MH
6: HH