Fusing/Exit Motor; Ptr Motor - Ricoh V-C3 D081 Field Service Manual

4. At the front, set the faceplate set the shaft [A] as shown above.
5. Fasten the faceplate with its screws ( x3).
6. At the back, tighten the screws ( x3) of the drum motor [B] and attach its connector (

Fusing/Exit Motor

1. Remove the fusing/exit motor [A] (

PTR Motor

• Remove the rear covers.
• Open the controller box door.
x1, x4).
Motors
4
x1).
499