Ricoh V-C3 D081 Field Service Manual page 709

• The pick-up motor, pick-up roller HP sensor harnesses, connectors were loose,
broken, defective
• Pick-up motor overload due to an obstruction
• Pick-up motor defective
• Pick-up roller HP sensor defective
Jogger Top Fence Motor: 3K Finisher B830
The top fence HP sensor detected that:
SC775 B
The top fence did not arrive at the home position within the specified number of pulses.
-or-
The top fence failed to leave the home position within the specified number of pulses.
If the jogger top fence motor is operating:
• Top fence HP sensor harness loose, broken, defective
• Top fence HP sensor defective
If the jogger top fence motor is not operating:
• Motor blocked by an obstruction
• Motor harness loose, broken, defective
• Motor defective
• Finisher main board defective
Jogger Bottom Fence Motor (B830)
The bottom fence HP sensor detected that:
SC776 B
The bottom fence did not arrive at the home position at the specified time.
-or-
The bottom fence failed to leave the home position at the specified time.
Service Call Tables
3
131