Ricoh V-C3 D081 Field Service Manual page 612

1. Appendix: Specifications
No.
M22 Duplex Inverter Motor
1
M23 Registration Motor
M24 Belt Cleaning Fan
M25 Pipe Cooling Fan Motor
M26 Paper Transport Fan Motor - Rear
M27 Paper Transport Fan Motor - Front
M28 Paper Exit Fan Motor
M29 Front Duplex Fan Motor
M30 Rear Duplex Fan Motor
M31 Potential Sensor Fan
M32 Cooling Fan Motor
M33 Circulation Fan Motor
Laser Unit Cooling Fan Motor -
M34
Front
Laser Unit Cooing Fan Motor -
M35
Rear
M36 Development Motor: Y
M37 Development Motor: C
M38 Development Motor: M
M39 Development Motor: K
Controller Box Exhaust Fan Motor
M40
2
34
Component
Feeds paper to the jogger section.
Rotates the registration roller.
Cools the upper area of the transfer unit where the PCUs
contact the ITB.
Pulls in air draws it over the fins attached to the front
end of the heat pipe roller.
1 of 2 vacuum fans that produce suction to kepp paper
on the transport belt.
1 of 2 vacuum fans that produce suction to kepp paper
on the transport belt.
Draws hot air from around the paper exit area and
expels it from the left side of the machine.
Draws hot air out of the duplex unit.
Draws hot air out of the duplex unit.
Circulates air around the potential sensors.
Draws air and sends it through a duct to the four PCU
cooling fans.
Circulates air.
Draws cool air into the machine.
Expels hot air from the machine on the left side.
Drives the Y development unit.
Drives the C development unit.
Drives the M development unit.
Drives the K development unit.
1 of 2 fans that cool the printed circuit boards at the
back of the machine.
Function