Ricoh V-C3 D081 Field Service Manual page 863

Use to remove individual dots in the background if they appear. Set higher for removal
of more background.
[0 to 7/1]
4600 Get ID
These SP codes display the readings of four ID codes read during automatic adjustment of the
SBU every time the machine is turned on. An incorrect ID reading SC144.
1 SBU
Displays the ID code (1-byte hexadecimal) read for the SBU .
[0 to 255 / 0 / 1]
2 GASBU-N
Displays the ID code (1-byte hexadecimal) read for the GASBU-N .
[0 to 255 / 0 / 1]
3 VSP_F
Displays the ID code (1-byte hexadecimal) read for the VSP5100_F .
[0 to 255 / 0 / 1]
4 VSP_L
Displays the ID code (1-byte hexadecimal) read for the VSP5100_.
[0 to 255 / 0 / 1]
4602 Scanner Memory Access DFU
4609 Gray Balance Adj Value R DFU
4610 Gray Balance Adj Value G DFU
4611 Gray Balance Adj Value B DFU
These SP codes display the reference voltages stored in NVRAM at the factory for Red,
Green, and Blue before the machine was shipped. The SBU acquires these settings every
time the machine is switched on.
B: Book Adj Value
1
[0 to 1023 / 0 / 1 Step]
Group 4000
4
285