Ricoh V-C3 D081 Field Service Manual page 625

No. Component
S83 ITB Position Sensor
LEDs
No. Component
LED1 Double-Feed Detection LED
Accordion Jam Sensor
LED2
(LED)
LED3 Fusing Exit Sensor (LED)
SOLENOIDS
No. Component
SOL1 Pick–up Solenoid: Tray 2
Separation Roller Solenoid:
SOL2
Tray 2
SOL3 Pick–up Solenoid: Tray 3
Separation Roller Solenoid:
SOL4
Tray 3
SOL5 Pick–up Solenoid – Tray 1
Separation Roller Solenoid
SOL6
– Tray 1
Monitors the speed of the ITB.
Emits light which is reflected from the paper to the double–feed
detection sensor to test the translucence of each sheet for
double-feed detection.
Flashes to show the user which lever to release to remove a
paper jam from the fusing rollers.
Flashes to show the user which lever to release to remove a
paper jam from the fusing unit.
Switches on when the tray 2 (middle tray) lift motor switches
on. This solenoid lowers the pick–up roller of tray 3.
When tray 2 (middle tray) is selected as the paper source, this
solenoid energizes and brings the separation roller in contact
with the feed roller until the leading edge of the sheet feeds to
the paper feed sensor.
Switches on when the tray 3 (bottom tray) lift motor switches
on. This solenoid lowers the pick–up roller of tray 3.
When tray 3 (bottom tray) is selected as the paper source, this
solenoid energizes and brings the separation roller in contact
with the feed roller until the leading edge of the sheet feeds to
the paper feed sensor.
Switches on when the tray 1 (tandem tray) lift motor switches
on. This solenoid lowers the pick–up roller of tray 1.
When tray 1 (tandem tray) is selected as the paper source, this
solenoid energizes and brings the separation roller in contact
with the feed roller until the leading edge of the sheet feeds to
the paper feed sensor.
Specifications
Function
Function
Function
1
47