Ricoh V-C3 D081 Field Service Manual page 490

4. Replacement and Adjustments
4
9. Remove the Teflon sleeve [A].
10. Push the rear shaft bearing [B] out of its bracket.
11. Push the front shaft bearing [C] out of its bracket.
12. Push the front end of the shaft [D] over the top of the bracket.
13. Push the rear end of the shaft [E] over the top of the bracket.
14. Pull the shaft [F] out of the belt.
15. Pull the belt [G] toward the front to remove it.
16. Slide the new belt over the assembly.
17. Insert the shaft [F] into the new belt, snap the shaft into its brackets, and push in the shaft bearings.
488