Ricoh V-C3 D081 Field Service Manual page 723

Pre-bind jogger shutter error
Not detected at HP after the time prescribed to arrive at the HP had elapsed (more
than 400 ms) (1st detection, jam, 2nd detection, SC error)
-or-
Detected at HP after the time prescribed to leave the HP had elapsed (more than
400 ms) (1st detection, jam, 2nd detection, SC error)
SC792-13 B
• Shutter motor (M608) connector loose, broken, defective
• Motor overload
• Motor defective
• Shutter HP sensor (S605) connector loose, broken, defective
• Sensor defective
50/100 clamp adjustment error
Not detected at HP after the time prescribed to arrive at the HP had elapsed (more
than 400 ms) (1st detection, jam, 2nd detection, SC error)
-or-
Detected at HP after the time prescribed to leave the HP had elapsed (more than
400 ms) (1st detection, jam, 2nd detection, SC error)
792-14 B
• 50/100 adjustment motor (M702) connector loose, broken, defective
• Motor overload
• Motor defective
• Ring switch HP sensor (S706) connector loose, broken, defective, or sensor
• Ring switch timing sensor (S707) connector loose, broken, defective, or
defective
sensor defective
Service Call Tables
3
145