Ricoh V-C3 D081 Field Service Manual page 799

7 Side1:PTR
12 Side2:PTR
242
TEdgeSWT:Norm K (PTR)
4
Trailing Edge Switch Timing for Plain Paper: K. This setting sets the start timing for application of
SP2423 at the trailing edge of each sheet (Side 1, Side 2). This setting is applied to the trailing
edge for black printing on plain paper at full speed and apply to black, even when printing in
full color mode.
[-100 to 0/1 mm]
The mm distance is measured away from the trailing edge of the image.
242
LEdgeCor:Norm FC
6
Leading Edge Correction for Plain Paper: FC. This SP sets the coefficient used to 1) correct bias
at the leading edge for full-color image transfer (ITB) bias at image to paper transfer when using
plain paper, and 3) correct the dc and ac voltages applied at paper separation.
Notes: These settings apply:
• Only the distance from the leading edge set with SP2427.
• Only to full color printing on plain paper at full speed.
7 Side1:PTR
8 Side1:SepDC
9 Side1:SepAC
12 Side2:PTR
13 Side2:SepDC
14 Side2:SepAC
2427 LEdgeSWT:Norm FC
[0 to 250/1%]
[0 to 250/1%]
Group 2000
4
221