Ricoh V-C3 D081 Field Service Manual page 727

Stacker error
Although the stacker was full at the start and end of stacker operation with the
stacker full (stacker sensors ON together), no documents were detected (also
when documents were leaning)
-or-
Although the stacker was detected full with the stacker stopped, no documents
were detected within 2 sec.
SC792-23 B
(1st detection jam, 2nd detection SC error)
• Stacker HP sensor (S501) connector loose, broken, defective, or sensor
defective
• Stacker height HP sensor (S502) connector loose, broken, defective, or
sensor defective
• Stacker detect sensor (S504) loose, broken, defective, or sensor defective
Service Call Tables
3
149