Ricoh V-C3 D081 Field Service Manual page 538

6. Troubleshooting
Result
4
7
9
Check 1-2. SP3817-001 to 004 (Developer Filling Admission) are all "0"?
"0000" should be displayed for all colors, K, M, C, Y
"0" = Developer filling has completed successfully.
"1" = Developer Filling has not completed successfully yet.
Check 1-3. SP3812-001 (Developer Setup Execute): displays 1111?
"1111" should display for all colors, K, M, C, Y, reading left to right.
6
Result
1 Succeeded.
2 Interrupted abnormally
3 Vt lower limit error
4 Default (nothing done yet)
8 Toner supply error
9 Vtcnt error
2. Next, do the following procedures according to the results of SP value checking.
Case 1 If one of Check 1-1, Check 1-2, or Check 1-3 failed do Procedure 1.
If all of Check 1-1, Check 1-2 and Check 1-3 all succeeded, the toner supply mechanism
Case 2
may be broken. First do Procedure 2, and then do Procedure 1.
If only Check 1-2 did not succeed (returned "1"), do Procedure 3 as a temporary solution.
Case 3 However, for a permanent solution be sure to do Procedure 1 after performing Procedure
3. Otherwise, the image density will be abnormal.
Procedure 1
536
Factory default (Nothing has been done)
Developer Filling (SP3814) has been performed more than once for the color, whose
developer has already completely filled the development unit.
Failed. No developer inside the development unit, or the amount of developer inside
the development unit is insufficient.
Comment
Comment