Ricoh V-C3 D081 Field Service Manual page 302

4. Replacement and Adjustments
9. Grip both sides of the image transfer unit and pull it slowly out of the machine.
Handling Precautions
• Remove the image transfer unit carefully. The unit is heavy and not attached to the rails with
screws.
4
• To prevent toner scattering inside and outside the unit, keep the unit (1) flat when you remove it, lift
it, carry it, and put it down.
• Never stand the ITB unit (2) on its edge before you remove the cleaning unit from the ITB.
• Never place the ITB unit on a carpet where toner can scatter or where the unit will collect dust.
Reinstallation
• Re-insert the image transfer unit slowly and carefully to avoid snagging the belt on the frame of the
machine.
• Make sure that the image transfer unit does not snag on the toner cap of the yellow PCU on the far
left.
300