Ricoh V-C3 D081 Field Service Manual page 356

4. Replacement and Adjustments
4
6. Position the front and rear of the PCU so that it matches the F (front) and R (rear) markings on the PCU
stand.
7. Set the PCU on the stand.
• The front-rear alignment aligns the shape of the stand with the contours of the PCU bottom.
• This also protects the exposed drum on the bottom of the PCU during servicing.
Removing Old Developer
Preparation
• Separate the drum unit and development unit.
• Cover the drum with a sheet of clean paper and set it aside.
1. Remove:
354