Ricoh V-C3 D081 Field Service Manual page 253

4. Remove the VM card from Slot 1 (lower slot).
• Before removing the VM card from Slot 1 (lower slot) you must shut down the App2 Me
application (and any other VM card applications) if it is running. See p.305 "Before Removing
and Re-installing the VM Card".
5. Insert the Source SD card in the Slot 1 (lower slot). This card contains the application that you want
to move to the other SD card.
• The PostScript3 SD card cannot be the source card because it cannot be copied.
6. Put the Target SD card in Slot 2 (upper slot).
• This must be another application SD card for this machine. You cannot use a blank SD card.
7. Open the front door.
8. Turn the main machine on.
9. Go into the SP mode and do SP5873-1.
10. Follow the instructions on the display and touch "Execute" to start copying.
11. When the display tells you copying is completed, touch "Exit".
12. Turn the main machine off.
13. Remove the Source SD card from Slot 1 (lower slot), and leave the target SD card in Slot 2 (upper
slot).
MFP Controller Options
2
251