Ricoh V-C3 D081 Field Service Manual page 352

4. Replacement and Adjustments
1. Place a sheet of clean paper on a flat surface.
4
2. Pour a small amount of G104 Yellow Toner (D0159500) [A] onto the paper.
3. Pour an equal amount of Zinc Stearate (D0159501) [B] into the yellow toner.
4. Mix the G104 Yellow Toner and Zinc Stearate together with your finger on the paper.
• Always use the G014 Yellow Toner, not the yellow toner of the D081/D082 or D014/D015.
• The D081/D082/D014/D015 yellow toner contains developer that could damage the
surface of the drum and ITB.
5. While rotating gear [A] in the direction of the arrow, use your finger to apply the mixture of yellow
toner and zinc stearate from the paper across the surface of the PCU drum lubricant brush roller [B].
• You must rotate gear [A] in the direction shown above.
• Use a brush to apply the mixture if one is available.
350