Ricoh V-C3 D081 Field Service Manual page 960

4. Appendix: Service Program Mode Tables
ADF Input Check
Open SP mode SP6007.
1. Select the SP number that corresponds to the component you wish to check. (Refer to the
6007
table below.)
2. Press On then press Off to test the selected item. You cannot exit and close this display
until you click Off to switch off the output check currently executing.
1 Original Tray B5 Detect Sensor
4
2 Original Tray A4 Detect Sensor
3 Original Tray LG Detect Sensor
4 Original Width Sensor 1
5 Original Width Sensor 2
6 Original Width Sensor 3
7 Original Width Sensor 4
8 Original Width Sensor 5
9 Original Set Sensor
10 Separation Sensor
11 Skew Correction Sensor
12 Entrance Sensor
13 Registration Sensor
14 Exit Sensor
15 Cover Sensor
16 ADF Position Sensor
18 Pick-up Roller HP Sensor
20 APS Start Sensor
21 Bottom Plate HP Sensor
382
Description
Reading
0
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
No paper Paper detected
Open
Open
Not HP
Not Start
Not HP
1
Close
Close
HP
Start
HP