End - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

end

Use the end command to exit the current configuration mode and enter the Enable Security mode.
Note
When exiting the Global Configuration mode, remember to perform a copy running-config
startup-config to save all configuration changes.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Usage Examples
The following example shows the end command being executed in the T1 Configuration mode:
ProCurve(config-t1 1/1)#end
#
#- Enable Security mode command prompt
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Common Commands
1436