Exit - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

exit

Use the exit command to exit the current Configuration mode and enter the previous one. For example,
using the exit command in an interface configuration mode will activate the Global Configuration mode.
When using the exit command in the Basic mode, the current session will be terminated.
Note
When exiting the Global Configuration mode, remember to perform a copy running-config
startup-config to save all configuration changes.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Usage Examples
The following example shows the exit command being executed in the Global Configuration mode:
ProCurve(config)#exit
#
# - Enable Security mode command prompt
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Common Commands
1437