Chrysler 2005 Crossfire SRT6 Service Manual page 287

ZH
1020-CAN BUS COMMUNICATION - GENERAL MALFUNCTION (CONTINUED)
2.
MEASURE THE RESISTANCE OF THE CAN C (-) BUS CIRCUIT
With the ignition off.
Measure the resistance of the CAN C Bus (-) circuit from the CAB har-
ness connector to the harness connectors of the other modules on the
CAN Bus network.
Is the resistance below 1.0 ohm?
Yes >> Replace the Controller Antilock Brake (CAB) Module.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL
MODULES/CONTROLLER
REMOVAL).
Perform ABS VERIFICATION TEST.
No >> Repair the CAN C Bus (-) circuit for an open.
Perform ABS VERIFICATION TEST.
BRAKES - ABS ELECTRICAL DIAGNOSTICS 5 - 121
ANTILOCK BRAKE -