Modifying The Mcu Properties - Polycom RMX 1500 Administrator's Manual

Modifying the MCU Properties

You can view the currently defined MCU settings, and modify them when
required, for example, change the MCU name, IP address or Secured
mode.
Use this procedure to add the Username and Password to the properties of
the MCU that was automatically added to the MCU list when installing
the RMX Manager. This enables automatic login when connecting the
MCU to the RMX Manager.
You can modify the MCU properties when the MCU is connected or
disconnected.
To view and/or modify the MCU Properties:
1
Use one of the following methods:
a
Select the MCU to disconnect and click the MCU Properties
button.
b
Right-click the MCU icon and then click MCU Properties.
The MCU Properties dialog box opens.
2 Define/modify the required parameters. For details, see "MCU
Properties" on page 18-18.
3
Click OK.
Polycom RMX 1500/2000/4000 Administrator's Guide
18-27