Rmx Integration Into Microsoft Lync Server 2010 Environment - Polycom RMX 1500 Administrator's Manual

RMX Integration into Microsoft Lync Server
2010 Environment
Configure the Polycom RMX FQDN Name in the DNS
From Version 7.1, RMX systems can be integrated into the Microsoft Lync
Server 2010 (Wave 14) environment.
In the Lync Server 2010 environment, only the Matched URI dialing
(using the SIP URI address) is available as the call routing method.
This section describes how to configure the RMX system and the
Microsoft Lync server 2010 to enable routing of video calls to conferences
running on the RMX system.
This section does not describe or provide full administration or maintenance
processes or procedures for Lync Server 2010. For any questions or assistance
on Lync Server 2010, see the Microsoft documentation and/or Microsoft
Support Services.
To enable the integration, the following tasks have to be performed:
• Configure the Polycom RMX FQDN Name in the DNS
• Set the Routing for the Polycom RMX System in the Lync Server
In addition, a certificate has to be created/purchased and sent to the
RMX.
Perform the following procedure to enable the Polycom RMX system to
receive Lync Server calls.
Polycom RMX 1500/2000/4000 Administrator's Guide
H-45