Polycom RMX 1500 Administrator's Manual page 921

Table C-19 Event Fields for Event 18 - NEW UNDEFINED PARTICIPANT
Field
Participant Name
Participant ID
Dialing Direction
Bonding Mode
Number of
Channels
Net Channel Width
Network Service
Name
Restrict
Audio Only
Default Number
Type
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
The name of the participant.
The identification number assigned to the participant by
the MCU.
The dialing direction, as follows
0 - Dial-out
5 - Dial-in
Not supported.
Always contains the value 0.
Note: This field is only relevant to ISDN/PSTN
participants.
The number of channels being connected for this
participant.
Not supported.
Always contains the value 0.
The name of the Network Service.
An empty field "" indicates the default Network Service.
Not supported.
Always contains the value 0.
Indicates the participant's Audio Only setting, as follows:
0 - The participant is not an Audio Only participant
1 - The participant is an Audio Only participant
255 - Unknown
Note: This field is only relevant to ISDN/PSTN
participants.
The type of telephone number.
Note: Since undefined participants are always dial-in
participants, the only possible value is:
255 - Taken from Network Service
C-39