Polycom RMX 1500 Administrator's Manual page 688

Chapter 19-RMX Administration and Utilities
19-24
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
CP_REGARD_TO
_INCOMING_SETUP
_RATE
DELAY_BETWEEN
_H320_DIAL_OUT
_PARTY
(ISDN)
DISABLE_GW_
OVERLAY_INDICATION
DISABLE_WIDE_RES_
TO_SIP_DIAL_OUT
Description
For use in the Avaya Environment.
If set to YES, the RMX calculates the line rate
for incoming calls in CP conferences,
according to the line rate which is declared by
the endpoint in the H.225 setup message.
If set to NO, the rate is calculated according to
the conference line rate regardless of the rate
in the H.225 setup message.
Default: YES.
The delay in milliseconds that the MCU waits
when connecting dial out ISDN and PSTN
participants.
Default: 1000
When set to NO (default), displays progress
indication during the connection phase of a
gateway call.
Set the value to YES to hide the connection
indications displayed on the participant's
screen during the connection phase of a
gateway call.
When set to NO (default), the RMX sends
wide screen resolution to dial-out SIP
endpoints. Endpoint types that do not support
wide screen resolutions are automatically
identified by the RMX according to their
product type and version and will not receive
the wide resolution even if the flag is set to
YES.
When manually added and set to YES, the
RMX does not send wide screen.
Default: NO.