Configuring The Rmx As A Routable Gateway - Polycom RMX 1500 Administrator's Manual

Appendix H-Setting the RMX for Integration Into Microsoft Environment
H-18

Configuring the RMX as a Routable Gateway

The RMX must be set as a routable voice gateway in the Office
Communications Server infrastructure. This does not restrict the RMX to
just voice operation, rather it means that the RMX can be set as a
destination for a voice route in the Office Communications Server
infrastructure.
The Office Communications Server infrastructure uses the WMI class
MSFT_SIPTrustedAddInServiceSetting to store information for
each voice gateway in the infrastructure. Typically, these gateways are
Office Communications Server Mediation Servers, but in this case, the
RMX is set as a voice gateway by creating a new instance of the class
MSFT_SIPTrustedAddInServiceSetting.
Polycom recommends using the Office Communications Server 2007 R2
Resource Kit Tools to accomplish this.
To set up the RMX/DMA as a Voice Gateway:
1
Download and install the Office Communications Server 2007 R2
Resource Kit Tools from the following URL:
http://www.microsoft.com/downloads/
details.aspx?familyid=9E79A236-C0DF-4A72-ABA6-
9A9602A93ED0&displaylang=en
2
Open a command prompt and navigate to where you installed the
resource kit. For example, C:\Program Files\Microsoft
Office Communications Server 2007 R2\ResKit\.