Start Monitoring/Stop Monitoring - Polycom RMX 1500 Administrator's Manual

Chapter 18-RMX Manager Application

Start Monitoring/Stop Monitoring

18-26
By default, all conferences running on connected RMXs are monitored.
You can stop the automatic monitoring of conferences on a specific MCU
in one of the following methods:
• By clearing the check box in the Monitored column in the MCUs pane.
• Right-clicking the MCU icon and selecting Stop Monitoring.
The check box is cleared in the Monitored column.
To start monitoring again, click the check box in the Monitored column in
the MCUs pane, or right-clicking the MCU icon and selecting Start
Monitoring.