Polycom RMX 1500 Administrator's Manual page 684

Chapter 19-RMX Administration and Utilities
19-20
Table 19-2 System Flags – MCMS_PARAMETERS (Continued)
Flag
SESSION
_TIMEOUT_IN
_MINUTES
TERMINATE_CONF_
AFTER_CHAIR_
DROPPED
USER_LOCKOUT
USER
_LOCKOUT
_DURATION
_IN_MINUTES
USER_LOCKOUT_
WINDOW_IN_MINUTES
Description
If there is no input from the user or if the
connection is idle for longer than the number
of minutes specified by this flag, the
connection to the RMX is terminated.
Value: 0-99
0 - Session Timeout is disabled, however this
feature cannot be disabled when the RMX is
in Ultra Secure Mode.
Default: 0
Default (JITC_MODE=YES): 15
If YES, sets conferences to automatically
terminate if the Chairperson disconnects from
the conference.
Default: YES
If YES, a user is locked out of the system
after three consecutive Login failures with
same User Name. The user is disabled and
only the administrator can enable the user
within the system.
Default: NO
Default in Ultra Secure Mode: YES
For details, see "User Lockout" on
page 13-14.
Defines the duration of the Lockout of the
user.
Value: 0 - 480
0 means permanent User Lockout until the
administrator re-enables the user within the
system.
Default: 0
Defines the time period during which the
three consecutive Login failures occur.
Value: 0 - 45000
0 means that three consecutive Login failures
in any time period will result in User Lockout.
Default: 60