Creating A Welcome Video Slide - Polycom RMX 1500 Administrator's Manual

Creating a Welcome Video Slide

13 To record additional messages, repeat steps 1 to 10.
To upload your recorded *.wav file to the RMX, see step 6 on
The video slide is a still picture that can be created in any graphic
application.
To create a welcome video slide:
1
Using any graphic application, save your image in either *.jpg or
*.bmp file format.
2
For optimum quality, verify that the image's dimensions adhere to
the RMX's maximum values: Width:1600, Height:1200 pixels.
3
Save your file.
To upload your video slide to the RMX, see step 12 on
If using a default Polycom slide, the slide's resolution will be as defined in the
profile, i.e. SD, HD or CIF.
If the display of the Welcome slide is cut in the upper area of the screen, change
the settings of the endpoint's monitor to People "Stretch" instead of "Zoom".
Polycom RMX 1500/2000/4000 Administrator's Guide
page
page 15-11
.
15-33
.
15-43