Lan Status Lights; Configuring Lan Properties - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

LAN Status Lights

Configuring LAN Properties

2–2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The LAN connector on the Polycom HDX 9000 series and Polycom HDX 6000
series has two lights to indicate connection status and traffic:
Indicator Light Connection Status
Left light off No 1000Base-T connection.
Left light green 1000Base-T connection. The light goes off each time a
frame is transmitted or received.
Right light off No 10/100Base-T connection.
Right light green 100Base-T connection. The light goes off each time a
frame is transmitted or received.
Right light yellow 10Base-T connection. The light goes off each time a
frame is transmitted or received.
The LAN connector on the Polycom HDX 8000 series, Polycom HDX 7000
series, and Polycom HDX 4000 series systems has two lights to indicate
connection status and traffic:
Indicator Light Connection Status
Left light off No 100Base-T connection.
Left light green 100Base-T connection. The light goes off each time a
frame is transmitted or received.
Right light off No 10Base-T connection.
Right light green 10Base-T connection. The light goes off each time a
frame is transmitted or received.
In IPv4/IPv6 hybrid networks, the system tries to place calls using the IPv6
address first. If that fails, the system tries to place the call using the IPv4
address.
You can configure LAN properties for the Polycom HDX Systems and for
Polycom Touch Control Devices. Refer to
LAN Properties on page 2-3
LAN Properties on page 2-7.
Configuring Polycom HDX System
and Configuring the Polycom Touch Control
Polycom, Inc.