Configuring The Video/Voice Resources In Mpm+ And Mpmx Mode - Polycom RMX 1500 Administrator's Manual

To allocate Audio Only resources:
1 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
A single slider is displayed, calibrated according to licensed video
resources indicated in CIF ports in the RMX.
2
Move the slider to the number of Audio Only ports to be allocated.
The slider moves in multiples of two (in MPM and MPM+ Card
configuration Modes) or three (in MPMx Card Configuration Mode),
converting CIF video ports to voice ports in groups of two/three,
with each CIF video port converting to five voice ports in MPM and
MPM+ Card configuration Modes and four voice ports in MPMx Card
Configuration Mode. The minimum number of voice ports that can be
allocated is 10 (2 video ports x 5 voice ports per video port) in MPM
and MPM+ Card configuration Modes and 12 (3 video ports x 4 voice
ports per video port) in MPMx Card configuration Mode.
3 Click OK.
Configuring the Video/Voice Resources in MPM+ and
MPMx Mode
Resource re-configuration should only be performed when no conferences are
running on the RMX.
Polycom RMX 1500/2000/4000 Administrator's Guide
Resource Maximum from License
19-61