Starting The Rmx Manager Application - Polycom RMX 1500 Administrator's Manual

Starting the RMX Manager Application

Once installed, the RMX Manager can be run using the
secured) or
https://
the Windows Start menu.
To use the browser:
1
In the browser's command line, enter:
http://<MCU Control Unit IP Address>/RmxManager.html
or
https://<MCU Control Unit IP Address>/RmxManager.html
2 Press Enter.
To use the Windows Start menu:
1
Click Start > Programs.
a
If the RMX Manager is displayed in the recently used programs
list, click RMX Manager in the list to start the application.
or
b
Click All Programs > Polycom > RMX Manager.
Polycom RMX 1500/2000/4000 Administrator's Guide
(secured) command in the browser's address line or
(non-
http://
18-7