Flexible Resource Capacity - Polycom RMX 1500 Administrator's Manual

Chapter 19-RMX Administration and Utilities
19-62
There are two Resource Capacity modes in MPM+ and MPMx Mode:
•

Flexible Resource Capacity

• Fixed Resource Capacity
Flexible Resource Capacity
Flexible Resource Capacity is the default resource allocation mode in MPM+
and MPMx Mode and is functionally identical to the MPM Flexible Resource
Capacity described above.
On the RMX1500 MPMx-Q assembly, the use of HD with Continuous Presence
requires an additional license. In the Resource Report and Resolution
Configuration panes, HD settings are displayed but are not enabled and if HD is
selected the system will enable SD by default.
To allocate Audio Only ports in MPM+ and MPMx mode:
1
Optional (otherwise skip to step 2): If the RMX is in Fixed Resource
Capacity mode:
a
In the RMX menu, click Setup > Video/Voice Port
Configuration.
The Video/Voice Port Configuration dialog box opens.
b
In the Resource Capacity Mode box, select Flexible Resource
Capacity.
c Click OK.
2
In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
If switching from Fixed mode, all video resources are allocated as CIF
video ports.
3
Continue with Step 2 of the MPM Mode Flexible Resource Capacity
procedure described above.
Fixed Resource Capacity
To allocate resources in Fixed Resource Capacity mode:
Resource re-configuration (if the system is already set to Fixed Resource
Capacity mode) should only be performed when no conferences are running on
the RMX.
1
Optional (otherwise skip to step 2): If the RMX is not in Fixed Capacity
Mode.