Polycom RMX 1500 Administrator's Manual page 804

Chapter 20-RMX Hardware Monitoring
20-6
2
Click the Event Log tab to view a log of events that were recorded by
the system for the RMX.
The logged events can be saved to a *.xls file by clicking the Save
Event Log button. It is not possible to save individual or multiple
selected events; the entire log file must be saved.
Table 20-4 MCU Properties - Event Log
Column
Record ID
Time Stamp
Type
Sensor Number
Sensor Description
Status
Ipmb Address(hex)
Description
The recorded ID number of the logged event.
Lists the date and time that the event occurred.
Displays the type of event recorded in the log.
The number of the LED sensor on the RMX unit.
Describes which sensor the event is being logged.
The sensor's active status.
Contains all the internal IPMI network addresses on
the IPMB bus, i.e. 0x20 (Switch), 0x86 (MFA), etc...