Polycom RMX 1500 Administrator's Manual page 869

Table B-1 Alarms (Continued)
Alarm Code
Central signaling component failure
Central Signaling indicating Faulty status
Central Signaling indicating Recovery
status
Central Signaling startup failure
Configuration of external database did not
complete.
Could not complete MPM Card startup
procedure
Could not complete RTM ISDN Card
startup procedure
CPU IPMC software was not updated.
CPU slot ID not identified
D channel cannot be established
Polycom RMX 1500/2000/4000 Administrator's Guide
Alarm Description
Possible explanations:
•
Central signaling component failure; unit type:
[NonComponent\CSMngnt\CSH323\CSSIP]
• Central signaling component failure; unit type:
(invalid: [NonComponent\CSMngnt\CSH323\CSSIP])
• Central signaling component failure - Invalid failure
type. Unit id: [id], Type:
[NonComponent\CSMngnt\CSH323\CSSIP], Status:
[Ok\Failed\Recovered]
•
Central signaling component failure - Invalid failure
type
Central signaling failure detected in IP Network Service.
Possible explanations:
•
Unit loading confirmation was not received.
•
No Media IP for this card.
•
Media IP Configuration confirmation was not
received.
• Unspecified problem.
The CPU slot ID required for Ethernet Settings was not
provided by the Shelf Management.
B-3