Communications Server Ice Environment - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Supporting Remote and Federated Users in Office

Communications Server ICE Environment

To enable the remote and Federation connections the following operations

must be performed:

Create an Active Directory account for the RMX that will be used for

registering and operating in the MS ICE environment

Enable the RMX User Account for Office Communication Server

Configure the RMX for ICE dialing for more details, see "Configuring

the RMX for Federated (ICE) Dialing" on page H-118.

To place federated calls between Domain A and Domain B in ICE environment

sub domains must be federated to the main domain or the RMX system must be

installed on a main domain.

The RMX can also be set for Matched URI Routing and/or Numerical

Dialing to Meeting Rooms. For more details, see "Setting the Matched URI

Dialing Method" on page

Creating an Active Directory Account for the RMX

The User account created for the RMX is used for registration in the Office

Communication Server and to automatically synchronize with the STUN

and relay (Edge) servers.

To add the RMX user to the Active Directory:

Go to Start > Run and enter dsa.msc to open the Active Directory

Users and Computers console

Polycom RMX 1500/2000/4000 Administrator's Guide

and "Setting the Numerical Dialing Method" on

Rmx 4000 Rmx 2000