Saving An Operator Conference To A Template - Polycom RMX 1500 Administrator's Manual

Chapter 8-Operator Assistance & Participant Move
8-20
Table 8-4 New Conference – General Options (Continued)
Field
ISDN/PSTN
Network Service
and Dial-in
Number
4
Click the Participants tab.
The New Conference - Participants dialog box opens.
You must define or add the Operator participant to the Operator
conference.
This participant must be defined as a dial-out participant.
Define the parameters of the endpoint that will be used by the RMX
User to connect to the Operator conference and to other conference to
assist participants.
For more details, see the RMX 1500/2000/4000 Getting Started Guide,
"Participants Tab" on page 3-23.
5
Optional. Click the Information tab.
The Information tab opens.
6
Enter the required information. For more details, see the
RMX 1500/2000/4000 Getting Started Guide, "Information Tab" on
page 3-27.
7
Click OK.
The new Operator conference is added to the ongoing Conferences list
with a special icon
The Operator participant is displayed in the Participants list with an
Operator participant icon
out to the Operator participant.

Saving an Operator Conference to a Template

The Operator conference that is ongoing can be saved as a template.
Description
If you have enable the option for ISDN/PSTN direct
dial-in to the Operator conference, assign the ISDN/
PSTN Network Service and a dial-in number to be
used by the participants, or leave these fields blank
to let the system select the default Network Service
and assign the dial-in Number.
Note: The dial-in number must be unique and it
cannot be used by any other conferencing entity.
.
, and the system automatically dials