Appendix B - Alarms And Faults - Polycom RMX 1500 Administrator's Manual

Appendix B-Alarms and Faults
Table B-1 Alarms (Continued)
Alarm Code
Backup of CDR files is required
Backup of log files is required
Bios version is not compatible with Ultra
Secure Mode.
Card failed to switch to Ultra Secure
Mode
Card failure
Card not found
Card not responding
B-2
Alarm Description
If the ENABLE_CYCLIC_FILE_SYSTEM_ALARMS is
set to YES (default setting when JITC_MODE System
Flag is set to YES) and a Cyclic File reaches a file
retention time or file storage capacity limit, the user is
alerted that CDR files need to be backed up.
If the ENABLE_CYCLIC_FILE_SYSTEM_ALARMS is
set to YES (default setting when JITC_MODE System
Flag is set to YES) and a Cyclic File reaches a file
retention time or file storage capacity limit, the user is
alerted that log files need to be backed up.
The current BIOS version is not compatible with Ultra
Secure Mode (JITC_MODE=YES).
Card failure occurred when the system was set to
Enhance Security Mode (JITC_MODE=YES).
Possible reasons for the card failure:
• Resetting Card
•
Resetting component
•
Unknown shelf error
• Unknown card error
This occurs when: the system does not receive an
indication about the card (since it does not exist...)
usually when the card was removed from the MCU and
the system did not have a chance to recalculate it
resources.
Possible reasons for the card not responding:
•
No connection with MPM card.
•
No connection with the Switch.