Polycom RMX 1500 Administrator's Manual page 833

4
You can select any one of the Hardware components indicating
"Diagnostics/Normal" in the status column and right-click
Properties from the menu. The card's General Info/Event Log/Active
Alarms properties are displayed.
5 Run Diagnostic Tests & Tests Monitoring by clicking the Run Tests
button. In the Hardware Monitor pane, the toolbar and card statuses
change to Tests in progress.
Table 20-18 Run Tests - Parameters
Parameter
Diagnostic Status
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Basic Diagnostic Status:
• Ready - ready to run diagnostics
•
Test in Progress - running diagnostics
•
Passed/Failed - Passed/Failed the diagnostics
tests
20-35