Polycom RMX 1500 Administrator's Manual page 388

Chapter 11-Conference and Participant Monitoring
11-26
Table 11-7 Participant Properties - Channel Status Parameters (Continued)
Field
Channels Used
(cont.)
Sync Status
Rx - Rate
Tx - Rate
Tx - Video Sync
Loss
Rx - Video Sync
Loss
Description
•
Number of Packets – The number of received
or transmitted packets since the channel has
opened. This field does not cause the display of
the faulty indicator.
•
Jitter (Peak) – Displays the network jitter (the
deviation in time between the packets) as
reported in the last RTCP report (in
milliseconds). Peak (in parentheses) reflects the
maximum network jitter since the channel was
opened.
•
Latency – Indicates the time it takes a packet to
travel from one end to another in milliseconds
(derived from the RTCP report).
Channel - The channel type: Video or Content.
Source - The name of the participant currently
viewed by this participant.
Position - The video layout position indicating the
place of each participant as they appear in a
conference.
Protocol Sync Loss - Indicates whether the system
was able to synchronize the bits order according to
the selected video protocol.
Video Intra Sync - Indicates whether the
synchronization on a video Intra frame was
successful.
Video Resolution - The video resolution of the
participant.
The received line rate.
The transmitted line rate.
When checked, indicates a video synchronization
problem in the outgoing channel from the MCU.
The counter indicates the sync-loss count.
When checked, indicates a video synchronization
problem in the incoming channel from the endpoint.
The counter indicates the sync-loss count.