Polycom RMX 1500 Administrator's Manual page 871

Table B-1 Alarms (Continued)
Alarm Code
Failed to connect to application server
Failed to connect to recording device
Failed to connect to SIP registrar
Failed to create Default Profile
Failed to initialize the file system
Failed to mount Card folder
Failed to open Apache server
configuration file
Failed to open Users list file
Failed to register with DNS server
Failed to save Apache server
configuration file
Failure in initialization of SNMP agent.
Fallback version is being used
Polycom RMX 1500/2000/4000 Administrator's Guide
Alarm Description
Possible reasons for the failure:
•
Failed to connect to application server:
•
Failed to establish connection to server, url = [url].
The MCU could not connect to any of the defined NTP
server for synchronization due to the remote server error.
Cannot establish connection with SIP registrar.
Possible reasons for the failure:
•
Failed to validate the Default Profile.
• Failed to add the Default Profile.
Possible reasons for the failure:
•
Failed to initialize the file system.
•
Failed to initialize the file system and create the CDR
index.
Failed to mount card folder.
Failed to open Apache configuration file.
Failed to save Apache configuration file.
Fallback version is being used. Restore current version.
Version being used: [running version]; Current version:
[current version].
B-5