Standard Mibs - Polycom RMX 1500 Administrator's Manual

Chapter 19-RMX Administration and Utilities
19-86

Standard MIBs

This section describes the MIBs that are included with the RMX. These
MIBs define the various parameters that can be monitored, and their
acceptable values
.
MIB Name
MULTI-MEDIA-
MIB-TC
(MULTIMTC.MIB)
H.320ENTITY-MIB
(H320-ENT.MIB)
H.320MCU-MIB
(H320-MCU.MIB)
H323MC-MIB
(H323-MC.MIB)
MP-MIB (H323-
MP.MIB)
Description
Defines a set of textual conventions used within the set
of Multi Media MIB modules.
This is a collection of common objects, which can be
used in an H.320 terminal, an H.320 MCU and an H.320/
H.323 gateway. These objects are arranged in three
groups: Capability, Call Status, and H.221 Statistics.
Used to identify managed objects for an H.320 MCU. It
consists of four groups: System, Conference, Terminal,
and Controls. The Conference group consists of the
active conferences. The Terminal group is used to
describe terminals in active MCU conferences. The
Controls group enables remote management of the
MCU.
Used to identify objects defined for an H.323 Multipoint
Controller. It consists of six groups: System,
Configuration, Conference, Statistics, Controls and
Notifications. The Conference group is used to identify
the active conferences in the MCU. The Notifications
group allows an MCU, if enabled, to inform a remote
management client of its operational status.
Used to identify objects defined for an H.323 Multipoint
Processor, and consists of two groups: Configuration and
Conference. The Configuration group is used to identify
audio/video mix configuration counts. The Conference
group describes the audio and video multi-processing
operation.