Polycom RMX 1500 Administrator's Manual page 447

Table 14-2 Default Management Network Service – Routers (Continued)
Field
Static Routes IPv4
Only Table
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
The system uses Static Routes to
search other networks for endpoint
addresses that are not found on the
local LAN.
Up to five routers can be defined in
addition to the Default Router. The
order in which the routers appear in the
list determines the order in which the
system looks for the endpoints on the
various networks. If the address is in
the local subnet, no router is used.
To define a static route (starting with
the first), click the appropriate column
and enter the required value.
Router IP Enter the IP address of the router.
Address
Remote Enter the IP address of the entity to be
IP reached outside the local network. The
Address Remote Type determines whether this
entity is a specific component (Host) or
a network.
•
If Host is selected in the Remote
Type field, enter the IP address of
the endpoint.
•
If Network is selected in the
Remote Type field, enter of the
segment of the other network.
Remote Enter the subnet mask of the remote
Subnet network.
Mask
Remote Select the type of router connection:
Type
• Network – defines a connection to
a router segment in another
network.
•
Host – defines a direct connection
to an endpoint found on another
network.
14-9