Polycom RMX 1500 Administrator's Manual page 824

Chapter 20-RMX Hardware Monitoring
20-26
To view the Card Properties:
1 In the Hardware Monitor pane, either double-click or right-click and
select Properties for the desired hardware component.
The following information is displayed:
Table 20-15 Card Properties - General Info
Field
HW Version
SW Version
Serial Number
Card Type
Board Part
Number
Board Mac
Address 1
Board Mac
Address 2
2
Click the Event Log tab to view a log of events that was recorded by
the system on the HW component.
For more information, see "MCU Properties - Event Log" on
page 20-15.
3 Click the Active Alarms tab to view alarms related to the hardware
component, i.e. temperatures and main power sensors.
For more information, see "Active Alarms" on page 20-16.
4 Click Close to return to the HW Monitor pane.
Description
The hardware component's version number.
The version number of the software installed on
card.
The hardware component's serial number.
Displays the type of card that occupies the slot.
The part number of the HW component's board.
Specific hardware address of the component. This
address is burnt onto the component and is
automatically identified by the system.
(If applicable) second Mac address.