Polycom RMX 1500 Administrator's Manual page 697

Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
SIP_AUTO_SUFFIX
_EXTENSION
SIP_ENABLE_FECC
=NO
SIP_FAST_UPDATE_
INTERVAL_ENV
SIP_FAST_UPDATE_
INTERVAL_EP
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Used to automatically add a suffix to a SIP
address (To Address) instead of adding it
manually in the RMX Web Client (SIP
address) when the SIP call is direct-dial and
not through a Proxy.
Example:
Participant Name = john.smith
Company Domain = maincorp.com
SIP_AUTO_SUFFIX_EXTENSION flag value
= @maincorp.com
Entering john.smith will generate a SIP URI =
john.smith@maincorp.com
By default, FECC support for SIP endpoints is
enabled at the MCU level. You can disable it
by manually adding this flag and setting it to
NO.
Default setting is 0 to prevent the RMX from
automatically sending an Intra request to all
SIP endpoints.
Enter n (where n is any number of seconds
other than 0) to let the RMX automatically
send an Intra request to all SIP endpoints
every n seconds.
It is recommended to set the flag to 0 and
modify the frequency in which the request is
sent at the endpoint level (as defined in the
next flag).
Default setting is 6 to let the RMX
automatically send an Intra request to
Microsoft OC endpoints only, every 6
seconds.
Enter any other number of seconds to change
the frequency in which the RMX send the Intra
request to Microsoft OC endpoints only.
Enter 0 to disable this behavior at the endpoint
level (not recommended).
19-33