Polycom RMX 1500 Administrator's Manual page 698

Chapter 19-RMX Administration and Utilities
19-34
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
SIP_FREE_VIDEO
_RESOURCES
SEND_SIP_BUSY_
UPON_RESOURCE_TH
RESHOLD
SITE_NAME
_TRANSPARENCY
=YES
SITE_NAMES_ALWAYS
_ON =NO
Description
For use in Avaya and Microsoft Environments.
When set to NO (required for Avaya and
Microsoft environments), video resources that
were allocated to participants remain allocated
to the participants as long as they are
connected to the conference even if the call
was changed to audio only. The system
allocates the resources according to the
participant's endpoint capabilities, with a
minimum of 1 CIF video resource.
Enter YES to enable the system to free the
video resources for allocation to other
conference participants. The call becomes an
audio only call and video resources are not
guaranteed to participants if they want to add
video again.
Default value in Microsoft environment: NO.
When set to YES, it enables the RMX to send
a busy notification to a SIP audio endpoint or
a SIP device when dialing in to the RMX
whose audio resource usage exceeded the
Port Usage threshold.
When set to NO, the system does limit the SIP
audio endpoint connections to a certain
capacity and will not send a busy notification
when the resource capacity threshold is
exceeded.
Default: NO
Set the value of this flag to NO to disable
Endpoint Name Transparency.
Default: YES.
Set the value of this flag to YES to enable the
permanent display of Endpoint Names.
Default: NO.