Manually Adding and Deleting System Flags
Currently no flags are defined in the CS_MODULE_PARAMETERS
section.
3
To modify a flag value, double-click or select the flag and click the
Edit Flag button.
4
In the New Value field, enter the flag's new value.
5
Click OK to close the Update Flag dialog box.
6
Repeat steps 2–4 to modify additional flags.
7
Click OK to close the System Flags dialog box
For flag changes to take effect, reset the MCU. For more information, see the
RMX Administrator's Guide, "Resetting the RMX" on page 19-132.
To add a flag:
1
In the System Flags dialog box, click the New Flag (
The New Flag dialog box is displayed.
2
In the New Flag field enter the flag name.
3
In the Value field enter the flag value.
Polycom RMX 1500/2000/4000 Administrator's Guide
) button.
19-21