Ethernet Settings - Polycom RMX 1500 Administrator's Manual

Ethernet Settings

14-30
In RMX 1500/4000 automatically identified speed and transmit/receive
mode of each LAN port used by the system can be manually modified if
the specific switch requires it in the Ethernet Settings dialog box. These
settings are not part of the Management Network dialog box as for
RMX 2000.
RMX 1500: The Port numbers displayed in the dialog box do not reflect the
physical Port numbers as labeled on the RMX 1500 MCU.
Table 14-12 shows the physical mapping of Port Type to the physical label
on the back panel of the RMX 1500.
Table 14-12 Physical Mapping - Port Type to Label on RMX 1500 and RMX 4000
Port Type
Media
Modem
Management 1
Signaling 1
ShM
To modify the automatic LAN port configuration:
1 On the RMX menu, click Setup > Ethernet Settings.
Label on MCU
1500
LAN 2 LAN 2
Modem LAN 1
MNG B LAN 2
MNG LAN 3
Shelf LAN 6
Chapter 14-Network Services
4000
RTM LAN Card
RTM-IP 4000 Card