Polycom RMX 1500 Administrator's Manual page 218

Hide thumbs Also See for RMX 1500:

Table of Contents

Chapter 3-Cascading Conferences

If the MGC is dialing the RMX and the cascaded link connects to the

conference via the Cascade-enabled Entry Queue without being

prompted for the conference password, set the flag to YES as follows:

— ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_PASSWO

Reset the MCU to apply the changes.

Defining the Cascade Enabled Entry Queue on the RMX

If the dialing is done from the conference running on the MGC that is the

Master MCU, a Cascade-enabled Entry Queue must be defined on the

RMX setting it as Slave.

For more details, see RMX to RMX Cascading.

Troubleshooting

Rmx 4000 Rmx 2000