Hardware Monitor Indications - Polycom RMX 1500 Administrator's Manual

Hardware Monitor Indications

When LAN Redundancy is enabled on the RMX, LAN 2 port is Active and
LED indications may appear.
The redundant LAN port is shown as Inactive and the LED indications on
the port are switched off.
When the Active LAN port fails and the redundant (Inactive) port takes
over, the LED indications appear.
In the Hardware Monitor pane the Lan List displays the two RMX LAN
ports together with their Status indication.
Table 14-18 RMX 1500/2000 /4000 RTM LAN LED Indications
Status
Active
Inactive
Standby
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
The LAN port is active
The LAN port is inactive
The LAN Redundancy option is enabled and this LAN
port is the redundant and in standby mode. In case of
failure, this port becomes active.
14-43